Shenzhen Newbridge Communication Equipment Co.,Ltd
Shenzhen Newbridge Communication Equipment Co.,Ltd
Add to Cart
60 meters HDMI 1.4a Cat5 Repeater 1.65Gbps 1080P
Feature
★ Support HDMI 1.4a
★ Support 3D
★ Support highest video resolution 1080p/60Hz
★ Support 1.65Gbps data rate and TMDS clock up to 165MHz
★ Support 8/10/12 bit deep color
★ Support AWG26 standard HDMI cable, input up to 15 meters, output up to 20 meters
★ Signal transmission: By using single cat-5e or cat-6(recommended) cable instead of HDMI cable, it can extend the distance up to 60 meters between TX (Transmitter) and RX (Receiver).
★ No loss of quality
★ Install in minutes
★ Need DC5V/1A power supply
Product Picture
Physical Connection Showing Picture
Interface
RX
TX
Operating and Connecting
1.Connect one HDMI cable between source device and TX (Transmitter) Extender, the max cable distance is 15 meters
2.Connect one HDMI cable between display device and RX (Receiver) Extender, the max cable distance is 20 meters
3.Connect single cat-5e or cat-6(recommended) cables instead of HDMI cables between TX (Transmitter) and RX (Receiver) Extender, the max cable distance is 60 meters
4.Connect 5V power supply to the TX (Transmitter) and RX (Receiver). The Power LED light will be turn on red during working.
5.LED indicator light
(1).TX (Transmitter) LED indicator light:
The blue LED light on RJ45 port will turn on when the source single input well. Meanwhile, the orange LED light on RJ45 port will turn on while the Cat5e/6 cable connects well.
(2).RX (Receiver) LED indicator light:
The orange LED light will turn on continuously when the source signal input well. Meanwhile, the blue LED light on RJ45 port will turn on continuously when the display device connects well.
6.EQ-Set button: Please press the button one time or more while there is no pictures or snow points on the display when all devices connect well.
Specification
| Length of CAT-5E/CAT-6 cable between RX and TX | Up to 60 meters |
| HDMI Input | 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i |
| Support Audio input | DTS-HD/Dolby-trueHD/DTS/Dolby-AC3/DSD |
| HDMI Output | 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i |
| Support Audio output | DTS-HD/Dolby-trueHD/DTS/Dolby-AC3/DSD |
| Max bandwidth | 165MHz |
| Max band rate | 1.65Gbps |
| Input Video signal | 0.5~1.5Volts p-p |
| Output DDC signal | 5Volts p-p (TT1L) |
| Input HDMI cable distance | ≤15m AWG26 HDMI standard cable |
| Output HDMI cable distance | ≤20m AWG26 HDMI standard cable |
| TX Max working current | 510mA |
| RX Max working current | 100mA |
| Power adapter format | Input: AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A |
| Operating Temperature range | (-15 to +55℃) |
| Operating Humidity range | 5 to 90%RH (No Condensation) |
| TX Weight | 100g |
| Dimension (L x W x H) | 81x43x22 (mm) |
| TX Weight | 100g |
| RX Weight | 120g |
Before power on, please check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:
| Serial NO | Trouble Description | Cause and Ways to deal with |
| 1 | Non-Power-Connected | 1. Check if the power adaptor head is truly and correctly inserted to the power socket. 2. Check the power switch if it is on status. |
| 2 | No Picture | 1. Please make sure the TV turns on and connected with the machine well. 2. To check if the signal source turns on and connected well. 3. Check the system connection well. 4. Check if the cables are all in good quality. 5. Please press the EQ-Set button one time or more to adjust the Inside EQ data. 6. HDMI Cable should be Standard Cable. |
| 3 | Obscure Picture | 1. Please try to connect all ports again to avoid bad connection. 2. HDMI Cable Quality ( HDMI Standard cable) |