Shenzhen Newbridge Communication Equipment Co.,Ltd
Shenzhen Newbridge Communication Equipment Co.,Ltd
Add to Cart
60m HDMI 1X2 splitter Extender by cat 5E/6 Cable,Fiber Optic Extender
Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
The Extender uses twos way single cat-6(recommended) cable instead of HDMI cable to transmit high definition signal up to 60 meters, cutting down the cost. The Extender is designed to supply for long distance transmission of high definition signal.
Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
Feature
★ Support HDMI 1.4a
★ Support 3D
★ Support highest video resolution
★ Support 3.4Gbps data rate and TMDS clock up to 340MHz
★ Support 8/10/12 bit deep color
★ Support AWG26 standard HDMI cable, input up to 10 meters, output up to15 meters
★ Support twos way cable extender by cat 6
★ No loss of quality
★ Install in minutes
★ Need DC5V/1A power supply
Physical Connection Showing Picture
Interface:
RX:
FX:
Operating and Connecting
1. Connect one HDMI cable between source device and TX (Transmitter) Extender, the max cable distance is 15 meters
2. Connect one HDMI cable between display device and RX (Receiver) Extender, the max cable distance is 20 meters
3. Connect single cat-5e or cat-6(recommended) cables instead of HDMI cables between TX (Transmitter) and RX (Receiver) Extender, the max cable distance is 60 meters
4. Connect 5V power supply to the TX (Transmitter) and RX (Receiver). The Power LED light
device connects well.
Specification
| Length of CAT-5E/CAT-6 cable between RX and TX | Up to 60 meters |
| HDMI Input | 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i |
| Support Audio input | DTS-HD/Dolby-true HD/DTS/Dolby-AC3/DSD |
| HDMI Output | 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i |
| Support Audio output | DTS-HD/Dolby-trueHD/DTS/Dolby-AC3/DSD |
| Max bandwidth | 340MHz |
| Max band rate | 3.4Gbps |
| Input Video signal | 0.5~1.5Volts p-p |
| Output DDC signal | 5Volts p-p (TT1L) |
| Input HDMI cable distance | ≤15m AWG26 HDMI standard cable |
| Output HDMI cable distance | ≤20m AWG26 HDMI standard cable |
| TX Max working current | 510mA |
| RX Max working current | 100mA |
| Power adapter format | Input: AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A |
| Operating Temperature range | (-15 to +55℃) |
| Operating Humidity range | 5 to 90%RH (No Condensation) |
| TX Weight | 164g |
| TX Dimension (L x W x H) | 93x80x25 (mm) |
| RX Weight | 112g |
| RX Dimension (L x W x H) | 80X45X23 (mm) |
Before power on, please check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:
| Serial NO | Trouble Description | Cause and Ways to deal with |
| 1 | Non-Power-Connected | 1. Check if the power adaptor head is truly and correctly inserted to the power socket. 2. Check the power switch if it is on status. |
| 2 | No Picture | 1. Please make sure the TV turns on and connected with the machine well. 2. To check if the signal source turns on and connected well. 3. Check the system connection well. 4. Check if the cables are all in good quality. 5. HDMI Cable should be Standard Cable. |
| 3 | Obscure Picture | 1. Please try to connect all ports again to avoid bad connection. 2,HDMI Cable Quality ( HDMI Standard cable) |